The MSI version says on their website that it "requires NVIDIA® ForceWare Release 90 driver" to enable SLi, despite the fact that the image shows it to have an SLi connector. Perhaps the 90 series allows you to do TurboCache and SLi at the same time?

The Club 3D card says SLi-ready on their website, but the image shows no SLi connector.

Several of the evga's only have 64-bit memory busses, watch out.

Gigabyte's offering comes with Serious Sam 2 apparently. It also has a much snazzier heatsink/heatpipe than the Leadtek and MSI cards, and yes I classify that as a fact and not an opinion.

No SLi Connector cards include: Club3D, inno3D (says it requires 90 series driver), and
Leadtek. The rest of the 7300 GTs do have the connector.

It might be what they did with the 6600 GT, SLi without the use of a bridge, but only the 90 drivers would recognise it

Had one sold it it needs to be clocked higher to compete maybe at the same speeds as the 7300gs or 6600gt my old x700 beats it.

Well, I have a 7300GT DDR3 520/1400. Perform exellent.

Not against my x700 or my cuz's 6600gt.

i have gigabyte 7300GT it is like 6600gt, and faster then x700... good card... best buy option

just got the Palit 7300GT DDR3 version. Quite nice actually. Pity they don't have the DDR3 version here for comparison.

there a 7300 gt 256 ddr3 variant....by palit
looks nice......and its freaking ddr3 so its very efficient

You should add the GDDR3 variant of this card, it isn't anything like its DDR2 sister ;)

is the ddr3 version half-height?
specifically is the inno3d ddr3 half-height?

there are some 7300GT's with 256MB of GDDR3 from Foxconn, Chaintech and Sparkle. btw, what are the core and memory clock speeds on GIGABYTE 7300GT TurboForce?i thought this card had much more higher memory clock rated at 800Mhz (2.5ns), not 700Mhz listed on here.

i have palit 7300 Gt sonic.. 500/1000 i've overclock it to 530/1300.. i think i can still tweak it a bit though..

I have a Maxsun 7300GT 256Meg DDR3 default clock 450/1000 currently running at 585/1600.
It came with 1.4 n/second ram chips. same as the ones on my 7900GS, which also runs at 1600. The 7300GT gets 5350 on 3Dmark 05 !! i couldn't be more happy for $100nz dollars.

hey im planning on buying this card for $120 AU . Do you reckon thats worth the price?

The Inno3D do has a SLI connector. I clocked it to 660/1440 (500/1400 stock) and it can hold maybe 20-30 MHz more on the core. It's a good card, the only drawback is the cooling - with closed case and no direct airflow to it, it gets to 60-62*C idle & 76-79*C when loaded. When i placed a fan on the case to blow directly on the card the temps dropped to 55*C idle and 67-68*C loaded. Good choice for less money.

my palit 7300gt has 500 core and 500 memory frequency,how can i incease the memory clock to 1000mhz?

Can any one help me choosing between XFX 7300 GS 256 MB up to 512 from the RAM or XFX GT 7300 GT 256 MB Limited and not able to take from the computer RAM.

Don't get either , they both suck . But if you are going to buy one of them , buy the 7300GT.

7300gt is a casual gamer's cost effective VC

If you had to choose between geforce 7300gt or the geforce 8400gs which would you choose? Dont;t have alot of money and it's for gaming..

Inno3D 7300GT 256MB DDR3 is a really good card for its price. :D

Between 7300gt sonic and 8400gs which will i choose? thnk guys

8400gs

Check Tomshardware a 8400gs is pure junk.
Equal to a FX-5700 get a card with ddr3,the card might play BF2 but thats all.

Don't forget XfX gives a great warrenty.The
next person you sell it to can call them to warrenty the product.I build computers guys
start with a 7600 GT look at its bandwith.